Posted On March 31, 2019

HP Procurve Configure Time and Default Gateway

kimconnect 0 comments
blog.KimConnect.com >> Networking >> HP Procurve Configure Time and Default Gateway
#configure gateway and NTP
ip default-gateway 10.10.10.1
timesync sntp
sntp unicast
sntp 30
# These are ntp.org servers for North America
sntp server 195.21.137.209
sntp server 23.239.24.67
sntp server 199.223.248.101
#sntp server 204.11.201.12
sntp server priority 1 195.21.137.209
sntp server priority 2 23.239.24.67
sntp server priority 3 199.223.248.101
time timezone -420
timesync sntp
sh time

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Post

Storage & Transfer Speed Unit of Measurement

Intro What's all this talk about bits and bytes? Why do hard drive manufacturers measure…

How to Analyze Inbound / Outbound Traffic

Connect to the PacketShaper by entering the following into your web browser:                packetshaper.kimconnect.com You will…

How to set UniFi controller as a Windows service

Download the software: https://www.ui.com/download/unifi/ Close any instances of the UniFi software on the controller Open…