Configure firewall to NAT these ports for RSA:
22 TCP
49 TCP
80 TCP
161 UDP
443 TCP
1645 UDP
1646 UDP
1812 TCP/UDP
1813 TCP/UDP
5500 TCP/UDP
5580 TCP
7002 TCP/UDP
7004 TCP/UDP Intranet
7022 TCP
7072 TCP
7082 TCP
Install the WMware appliance image (RSA.ova)
FQDN: rsa.kimconnect.com, IP: 192.168.135.135/24 GW: 192.168.135.1
Use Internet Explorer, go to rsa.kimconnect.com to initialize the setup
Access the administrative consoles by using the links below.
-Security Console (Used for day-to-day activities such as managing users and tokens):
-Operations Console (Used for configuration and maintenance activities):
Note: If the URL is unavailable, wait a few minutes for services to start, and try again.
If you plan to migrate from RSA Authentication Manager 7.1, the first import you complete on RSA Authentication Manager 8.1 overwrites all existing data in the deployment and removes attached replica instances.
----------------------------------------------------------------------
Optional:
Add a new NIC
sudo vim /etc/sysconfig/network/routes
--- add firewall IP ---
default 192.168.135.1 - eth1
-----------------------
sudo vim /etc/sysconfig/network/ifcfg-eth1
-----------------------
IPADDR=192.168.135.135
PREFIXLEN=24
BROADCAST=192.168.135.255
-----------------------
/etc/init.d/network restart
Categories: