At first glance, one would be tempted to simply expand an existing a /swapfile as generated by Linux Mint installation defaults. Although that may be helpful in allocating more storage as augments for physical RAM, such /swapfile cannot be used toward hibernation resumes. A device or partition is required for hibernation to work correctly. Hence, these are the 2 options as prerequisites to enabling hibernation:
- Add a new physical disk as dedicated toward hibernation. When dealing with virtual machines, this would be the obvious choice.
- Resize an existing partition to reallocate storage toward a new partition. This is a risky move that could render the original partition as broken in worst-case scenarios.
Given the explanations above, we shall proceed with demonstrating this configuration.
Part 1: Enable hibernation menus and setting system to bypass memory checking
# Create the option to hibernate
sudo tee /etc/polkit-1/localauthority/90-mandatory.d/enable-hibernate.pkla <<'EOF'
[Enable hibernate]
Identity=unix-user:*
Action=org.freedesktop.login1.hibernate;org.freedesktop.login1.handle-hibernate-key;org.freedesktop.login1;org.freedesktop.login1.hibernate-multiple-sessions
ResultActive=yes
EOF
# Obtain path of systemd-logind.service
kim@kim-linux:~$ systemctl show -p FragmentPath systemd-logind.service
FragmentPath=/lib/systemd/system/systemd-logind.service
# Insert Line after [Service] to bypass memory checking
sudo sed -i '/^\[Service\].*/a Environment=SYSTEMD_BYPASS_HIBERNATION_MEMORY_CHECK=1' /lib/systemd/system/systemd-logind.service
# Restart systemd-logind
sudo systemctl restart systemd-logind
sudo systemctl daemon-reload
kim@kim-linux:~$ systemctl restart systemd-logind
Warning: The unit file, source configuration file or drop-ins of systemd-logind.service changed on disk. Run 'systemctl daemon-reload' to reload units.
Part 2: Add a swap partition
# Discover physical disks on the system
root@kim-linux:/home/kim# lsblk -ido KNAME,TYPE,SIZE,MODEL
KNAME TYPE SIZE MODEL
loop0 loop 97.9M
sda disk 14.9G KINGSTON_SNS4151S316GD
sdb disk 232.9G Samsung_SSD_850_EVO_250GB
# List the partitions
root@kim-linux:/home/kim# parted -l
Error: /dev/sda: unrecognised disk label
Model: ATA KINGSTON SNS4151 (scsi)
Disk /dev/sda: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: unknown
Disk Flags:
Model: ATA Samsung SSD 850 (scsi)
Disk /dev/sdb: 250GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 538MB 537MB fat32 EFI System Partition boot, esp
2 538MB 250GB 250GB ext4
# Initiating partitioning process
root@kim-linux:/home/kim# sudo parted /dev/sda
GNU Parted 3.3
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
# Create partitioning table as 'gpt'
(parted) mklabel gpt
# Create primary partition using the entire disk
(parted) mkpart primary swap 0% 100% # Correct command would be mkpart primary linux-swap 0% 100%
parted: invalid token: linux-swap
# Check result
(parted) print
Model: ATA KINGSTON SNS4151 (scsi)
Disk /dev/sda: 16.0GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:
Number Start End Size File system Name Flags
1 1049kB 16.0GB 16.0GB primary
# Exit partitioning program
(parted) quit
Information: You may need to update /etc/fstab.
# Alternative command to perform the steps above as 1-liner, assuming gpt has been set on a disk without any partitions
parted -a optimal /dev/sda mkpart primary '0%' '100%'
# Check disk partitions
root@kim-linux:/home/kim# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 97.9M 1 loop /snap/core/10583
sda 8:0 0 14.9G 0 disk
└─sda1 8:1 0 14.9G 0 part
sdb 8:16 0 232.9G 0 disk
├─sdb1 8:17 0 512M 0 part /boot/efi
└─sdb2 8:18 0 232.4G 0 part /
# Set swapfile variable - be certain that a valid value is given here
# In this example: /dev/sda1 has been formatted as swap prior to this
swapPartition=/dev/sda1
# Zero out first 16MB of disk to effectively clear its partitioning table
sudo dd if=/dev/zero of=$swapPartition count=4096 bs=4096
# Set appropriate permissions to secure the directory
chmod 600 $swapPartition
# Create swapfile in the swapPartition directory
mkswap $swapPartition
#configure system to use $swapfile
swapon $swapPartition
# Check swapPartition settings
swapon -s
root@kim-linux:/home/kim# swapon -s
Filename Type Size Used Priority
/swapfile file 16777212 0 -2
/dev/sda1 partition 15637500 0 -3
# Enable swapPartition to persist reboots
sudo echo "$swapPartition swap swap sw 0 0" >> /etc/fstab
# Check fstab
cat /etc/fstab
Part 3: replace swap file with swap partition
# Check for existence of swap files and partitions
root@kim-linux:/home/kim# swapon -s
Filename Type Size Used Priority
/swapfile file 16777212 0 -2
/dev/sda1 partition 15637500 0 -3
# Comment out /swapfile usage as hibernation cannot work with it
sed '/^#/! {/swapfile/ s/^/#/}' -i /etc/fstab
# Remove the /swapfile
rm /swapfile
# Restart swapping engine
swapPartition=/dev/sda1 # Specify swap partition
swapoff -a # turn off swapping
swapon $swapPartition # direct engine to use given swap partition
Part 4: enable startup resuming process to retrieve saved session and fix grub os_prober bug
# Unique identifier (UUID) is a 128 bit number of 32 hexadecimal digits, a constant value used to name partitions in Linux operating systems. Since this value is a property of the partition, it can be transferred to different systems without loosing data. Target systems often automatically create hard links as mount points (e.g. /dev/sda1) toward the partition's UUID. It's recommended that the UUID value is being used on system resuming, instead of partitioning mount points.
# Discover the swap partition's UUID by correlating discovered disks to mounted IDs
root@kim-linux:/home/kim# ls -l /dev/disk/by-uuid
total 0
lrwxrwxrwx 1 root root 10 Jan 17 16:53 2e561ffb-fc38-4a2f-a7e3-f72659fff171 -> ../../sda1
lrwxrwxrwx 1 root root 10 Jan 17 16:09 4249-C724 -> ../../sdb1
lrwxrwxrwx 1 root root 10 Jan 17 16:09 de2a0dd7-1aea-4db2-a62d-0bc739646c8e -> ../../sdb2
# Set resume to retrieve saved sessions from the swap partition
sudo su
swapUuid=/dev/disk/by-uuid/2e561ffb-fc38-4a2f-a7e3-f72659fff171
sed -i '/^GRUB_CMDLINE_LINUX_DEFAULT=*/ c\GRUB_CMDLINE_LINUX_DEFAULT=\"quiet splash resume='"$swapUuid"'\"' /etc/default/grub
# Fix grub boot delays
# Comment out last matching line of 30_os-prober (a bug)
file=/etc/grub.d/30_os-prober
lastMatchLineNumber=$(grep -n 'adjust_timeout' "$file" |tail -1|cut -f1 -d':')
sed -e "$lastMatchLineNumber s/^#*/#/" -i $file
# Edit grub
sudo vim /etc/default/grub
##### Set content similar to this #####
GRUB_DEFAULT=0
GRUB_HIDDEN_TIMEOUT=0
GRUB_TIMEOUT_STYLE=hidden
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=0
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash resume=/dev/disk/by-uuid/2e561ffb-fc38-4a2f-a7e3-f72659fff171"
GRUB_CMDLINE_LINUX=""
# Update grub
sudo update-grub
sudo update-grub2
sudo update-initramfs -u
# Test Hibernation
sudo systemctl hibernate
The following steps deal with swap files, which is NOT helpful with hibernation. These are included here as reminder.
# Attempt to trigger hibernation
kim@kim-linux:~$ systemctl hibernate
Failed to hibernate system via logind: Not enough swap space for hibernation
# Check memory & swap
kim@kim-linux:~$ free -m
total used free shared buff/cache available
Mem: 32016 4179 24991 1204 2845 26243
Swap: 2047 0 2047
# Increase swap to 16GB
swapoff -a # turn off swapping
sudo dd if=/dev/zero of=/swapfile bs=1M count=16384 # copying zeros to swap with data size of 16GiB
sudo chmod 600 /swapfile # set correct permissions
sudo mkswap /swapfile # create swapfile
swapon -a # turn on swapping
# Check swapfile location
root@kim-linux:/home/kim# cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda2 during installation
UUID=de2a0dd7-1aea-4db2-a62d-0bc739646c8e / ext4 errors=remount-ro 0 1
# /boot/efi was on /dev/sda1 during installation
UUID=4249-C724 /boot/efi vfat umask=0077 0 1
/swapfile none swap sw 0 0
Categories:
