Enable Untagged Vlans:
------------------------------------------------------------------
set port vlan ge.2.1-30 20
set vlan egress 20 ge.2.1-30 untagged
reload
Enable jumbo frame support:
show port jumbo
set port jumbo enable ge.2.22-30
Enable LACP:
show lacp state <=== to discover global lacp setting status
set lacp {disable|enable}
set lacp asyspri 1000 <=== set LACP system priority to 1000
clear lacp aadminkey ge.2.3 <=== clear LACP admin key
Save running-config:
router
enable
write terminal
show ip protocols <=== discover whether CDP, RIP, BGB or OSPF and other details (gateway, routes, distances)
core router
Enable lacp:
set lacp aadminkey lag.0.3 3
set port vlan lag.0.3 20
set lacp singleportlag enable
set port lacp port ge.2.7-10 aadminkey 3
set vlan egress 20 lag.0.3;ge.2.7-10 untagged
set port alias lag.0.3 ESX01
Make config persistent:
Standalone Enterasys devices are defaulted to save configurations automatically every (2) minutes.
Read: Enterasys Crash Course
http://myhowtosandprojects.blogspot.com/2012/03/enterasys-switches-crash-course.html
Perform maintenance:
1. Save config
--------------
dir
del slot1/myconfig
copy image1 slot1/07292015
copy slot2/07292015 tftp://10.10.10.37/CORE01-07292015
show config outfile slot2/07292015
--------------
2. Upgrade firmware (optional)
a. download: https://extreme-networks.my.site.com/
b. Store on TFTP server: \\backup01\G$\networking
c. Transfer to switch
copy 10.10.10..37/{filename} slot2/{filename}
dir
set boot system {filename}
Categories:
